megaFumpa Manual

USB Type-C Version WDMEGV10

Please read and comply with these instructions prior to using your megaFumpa

 

Intended Use

megaFumpa is intended for use as a portable air compressor for pumping car, motorbike and bicycle tyres up to 120psi.

Protect the unit from rain. Do not store outside.

Using a megaFumpa needle valve, megaFumpa can be used to inflate sporting equipment such as footballs, netballs and basketballs.

megaFumpa can be used to inflate large volume objects such as swimming pools, boats, beach balls and large inflatable toys.

The manufacturer is not responsible for damage due to incorrect operation.

 

Environmental Protection

megaFumpa contains a lithium battery.  Please dispose of megaFumpa correctly.

 

Safety Instructions

Child safety - megaFumpa is not to be used by children, unless supervised by an adult. megaFumpa is not a toy.

Risk of fire – Do not subject megaFumpa to temperatures exceeding 50oC. Do not leave megaFumpa in a hot car.

Risk of electric shock – Never use megaFumpa with wet hands. Check the USB charge cable for damage before use.

Risk of explosion – Do not use megaFumpa near explosive or combustible gases, liquids or reactive dust particles (such as aluminium, magnesium or zinc).

 

Package Contents

When opening the box, the you find find the following (refer to the image below):

  • 1 x megaFumpa bike pump
  • 1 x USB Type A to Type C cable
  • 1 x USB Type C to Type C cable
  • 1 x needle valve and inflatable toy valve
  • 1 x Carry bag
  • 1 x Presta only adapter, 1 x Schrader only adapter

Place all items inside the carry bag when the pump is not in use. 

Charging megaFumpa

Charge megaFumpa by connecting the supplied USB Type C cable to the USB Charge Port. Connect the other end of the USB cable to a USB wall charger or USB PD charger (not supplied). The START/STOP button will glow red, indicating that megaFumpa is connected to the charger. The button will glow red even when the pump is fully charged. Using a 5V, 2Amp USB supply, megaFumpa should be recharged in ~3 hours. Using a 9V, 3Amp USB-PD supply, megaFumpa should be recharged in ~90 minutes.

 

PLEASE NOTE:

  • Never leave your pump charging unattended!
  • Do not operate the unit while it is connected to a charger. Doing so can damage the battery! Always disconnect the USB charge cable before use.
  • Counterfeit wall chargers pose a fire risk and can damage your pump!
  • Only charge your pump using wall chargers purchased from reputable consumer electronics stores!
  • Ensure your charger is marked with at least one of these symbols:

 

 

Using megaFumpa

 

1 3